Thick denim folded into three layers.Evenly sews thick fabrics effortlessly
Stitching thin fabrics.No fabric shrinkage even sewing on light weight cotton.
Stitching towel fabrics.Evenly feeds hard-to-sew fabrics.
The BOX Feed system stays in contact with your fabrics longer, reliable seam every time.
You can sew with the presser foot slightly floated.
Using the float function
Not using the float function.Pressure on layers create uneven seams.
The height of the presser foot can be set in increments of 0.1 mm, allowing delicate adjustment according to the materials
Use the buttonhole sensor system for optimal feed on all types of fabric.
The buttonhole sewing presser foot contains a clamping plate, so you can confidently feed fabrics by holding them between the clamping plate and the presser foot.
16 types of buttonholes are available for your needs
Cutting width adjustment of the buttonhole.Now it is possible to adjust the cutting width in 3 steps.
Presser Foot Pivot Function
When you stop sewing, the needle stops in the down position and presser foot automatically lifts to allow for fabric movement.
Easy-to-use Quick Select Buttons
-Presser foot auto lift
Setting of the Presser Foot Lifting After Thread Trimming
Adjustable Starting / Reverse Stitch Speed
You can adjust the starting and reverse stitch speed between three steps of fast, normal, and slow.
For the lock stitch at the start and the end of sewing, you can choose two kinds of “Reverse stitch” and “Lock stitch”.
Low-Speed Inching Sewing
By pressing and holding the needle up/down button, you can sew slowly. Sew corners, stops and starts with precision.
Presser foot can be raised and lowered by the knee-lifting lever.
Automatic Needle Threader
Simply place the thread in the guide and lower the lever. Easily and quickly thread a needle with one hand.
|Number of stitch patterns||287|
|Number of available fonts||4|
|Buttonhole||Automatic (sensor system) with clamping plate|
|Direct stitch pattern selection||10 patterns|
|Maximum stitch speed||1,050 sti/min|
|Auto thread trimming||X|
|Automatic needle threader||Automatic needle threader|
|Thread tension system||Automatic|
|Automatic lock stitch||Automatic lock stitch and thread trimming|
|Feed mechanism||BOX feed mechanism|
|Presser foot pressure adjustment||Stepless adjustment|
|Quick bobbin preparation||X|
|Bobbin thread winder||Bobbin winder with independent motor|
|Light||2 LED lights|
|Straight stitch slide plate||X|
|Change in the length/width of stitches||Dial system|
|Number of needle positions for stitch patterns||37 / 3|
|Pattern (right and left) reverse||X|
|Twin needle sewing||X|
|Adjustable starting / reverse stitch speed||X|
|Low-speed inching sewing||X|
|Presser foot pivot function||X|
|Memory function||10 patterns|
|Presser foot horizontality holder button||X|
|Height of lifting of presser foot (1 step/2 steps)||Button system: 6 mm / Lever system 12 mm|
|Hard case||Hard case with accessory storage part|
|Knee lifting lever||X|
|Foot controller||Included; with foot switch function|
|Standard presser foot (A)|
|Zipper presser foot (B)|
|Overcasting presser foot (C)|
|Blind stitch presser foot (D)|
|Buttonhole presser foot (E)|
|Manual buttonhole presser foot (I)|
|Open toe presser foot (O)|
|Quilt presser foot (Q)|
|Needle set HA X 1|
|Spool cap (large)|
|Spool cap (middle)|
|Spool cap (small)|
|Walking foot (N)|
|Quilt presser foot (Q)|
|Auxiliary spool pin|
|Operation support DVD|
|Edge Sewing presser foot|
|Smooth presser foot (T)|
|Inside the QVP special accessories box:|
|Presser foot with guide|
|Cording presser foot (for 3 cords)|
|Cording and embroidery presser foot|
|Applique presser foot|
|Pearl attaching presser foot|
|Quilt Presser Foot ( transparent type )|
|Stitch Area Magnifier|
|Invisible Zipper Foot|
|Button Attaching Presser Foot|
|Rolled Hemming Presser Foot|
|Quilt Presser Foot ( open type )|